Digital BW, The Print

That was a total catastrophe when I tried it. People here are now
advising against that procedure because the Eboni and OEM blacks don't
like each other and form gunk on the head pads.

What I will do is check for banding in all the cartridges.

-Pieris
digital darkroom blog: http://www.pmb.net/darkroom

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Michael Hung"
<mhkhung@y...> wrote:
> 
> It's quite likely the black cart.. Put an Epson 007 cart in,
> clean/nozzle check, then print the 5-6 purge pages (you can just
print
> the black one if you are sure it's the black). You should see
banding
> first and then clear up. Put the MIS cart back in, clean/nozzle
check
> and do a few more purges.
> 
> Michael
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Pieris
> Berreitter" <pieris@y...> wrote:
> > 
> > I've got a banding problem that showed up recently (after a nasty
> > clog, actually). Looking back at an old step wedge it's evident
that
> > the problem is new.