Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "bmg5" <bmg5@y...> wrote:
> 
> Hi,  I cant help but think I should know the answer but here 
> goes.... When I use QTR and print at 720 I get pretty good results 
> in relation to my original.  When I move to 1440 I am roughly 2 
> stops darker.  I realize this is laying down more dots but 
> shouldtn't it be close to the same brightness at either setting?  
> What am I missing... Thanks BG (using epson UC's with a 9600)

QTR connects to the printer at a low, raw level so the number of dots
is relevant.  You need to have ink limits set differently for different
resolutions.   The lightness/darkness you see is likely.   However,
the profiles were all made for 1440dpi so I would think that would
give the best results. 

Roy