Yeah. The weird stuff is the paper white. I just re-measured Epson Premium Luster (it's been hanging for around 9-10 hours) and it is 94.7 -0.6 -4.2 without glop and constant at 94.2 -0.7 -3.5 with glop. Yet it looks dirtier where there is glop. Photorag doesn't look as bright to my eye yet reads 97.2 0.5 -0.4. The RC papers have a noticeable baby blue tint when compared with HPR. But I will take the extra dMax anyday! > From: Louis Dina <lbdina@...> > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com> > Date: Sat, 19 Feb 2005 00:23:08 -0000 > To: <DigitalBlackandWhiteThePrint@yahoogroups.com> > Subject: Re: [Digital BW] Overcoating with glop (was My experiences with GLOP > and UT7) > > > > Wow, > > Those are some great Dmax numbers, translating to a density of about > 2.55. That's right up there with a great wet darkroom print. Thanks > for the feedback. > > Lou > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale > <stevekale@b...> wrote: >> FYI here are some results of applying a straight 50% glop to > various papers. >> I took the measurements while doing some colour profiling using an > Eye One >> and the i1 TC 9.1B RGB Testchart. I started by recording > measurements of >> patch 17A only to later realise it was not the darkest patch! I >> subsequently also measured patch 1A. I also measured the impact on > paper >> white which was noticeable much more so than with coatings of 15% > and 20%. >> (Lab readings) There are a few gaps but it still might be helpful. >> >> Epson Premium Luster: >> >> Paper white pre glop 96.1 -0.4 -4.1 >> Paper white post glop 94.2 -0.7 -3.7 >> Patch 17A pre glop 6.6 >> Patch 17A post glop 4.2 -3.5 1.1 >> Patch 1A pre glop >> Patch 1A post glop 2.5 0.2 -0.2 >> >> Ilford Smooth Pearl >> >> Paper white pre glop 96.6 0.2 -5.8 >> Paper white post glop 94.8 -0.3 -5.4 >> Patch 17A pre glop >> Patch 17A post glop 4.1 -3.4 1.0 >> Patch 1A pre glop >> Patch 1A post glop 2.5 0.2 -0.3 >> >> EPSG >> >> Paper white pre glop 95.1 -0.6 -3.9 >> Paper white post glop 94.8 -0.8 -3.4 >> Patch 17A pre glop 6.2 -3.6 0.1 >> Patch 17A post glop 4.2 -3.3 1.0 >> Patch 1A pre glop 4.3 0.2 -1.4 >> Patch 1A post glop 2.6 0.3 -0.3 >
Message
Re: [Digital BW] Overcoating with glop (was My experiences with GLOP and UT7)
2005-02-19 by Steve Kale
Attachments
- No local attachments were found for this message.