Phil, Is the nozzle check perfect? It is odd that it would do the same thing on a second print with a nozzle problem, however. So this is probably not what is going on. The first few inches may be not advancing properly with just the main feed rollers. Perhaps once the paper is also being pulled by the exit rollers the problem disappears. This might indicate that the main feed rollers are not doing the job for some reason. Has some troublesome paper been used lately, like Crane Museo? Paul www.PaulRoark.com ____________________________ -----Original Message----- From: Philip Glaser [mailto:glaserp@...] Sent: Thursday, February 24, 2005 5:21 AM To: DigitalBlackandWhiteThePrint@yahoogroups.com Subject: [Digital BW] Epson C86 and Faint streaking in the first 2-3 inches of print Hi, I am using Epson Enhanced Matte paper with my new Epson C86 printer. I began with the MIS Eboni Black ink but switched back to the Epson cartridge to narrow down the variables to get to the source of this problem: though most of the print looks ok, in the first few inches of the print there is some very light streaking - faint lines of lighter ink density. As one would imagine, these lines are visible only in areas of mid to darker tone in the print. I have tried cleaning the heads several times but the streaks remain. I also thought that because the problem was in the first few inches of the print, perhaps the printer needed to "warm up" and get the ink flowing, and so I tried making two prints in a row. That did not help. Any suggestions? Thanks! --Phil [Non-text portions of this message have been removed] Please visit the Group Homepage to check the Files, and other resources as they are often being updated. http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. Please follow these basic guidelines: - As threads develop, trim off excess portions of earlier messages to keep them short. - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See Group Topic, Rules and Guidelines in the Files section: http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. Yahoo! Groups Links
Message
RE: [Digital BW] Epson C86 and Faint streaking in the first 2-3 inches of print
2005-02-24 by Paul Roark
Attachments
- No local attachments were found for this message.