Please tell me what "ANR" (Anti Newton Ring) glass is. What makes it different from other glass and where would I find it? Thanks, Bruce Varner http://mywebpages.comcast.net/btvarner/Bruce/photo.htm > > The subject has been explored pretty thoroughly on the Yahoo 4870 > > group. The problem is that the focal plane for a transparency scan is a bit higher off the platen than for a reflective scan and the DOF isn't quite deep enough to give a sharp image. > > Use the 4x5 tranny holder that comes with the 4870, or the alternative which is to cut a matt board with the correct thickness, approx .070, then put the tranny over that, then put a piece of ANR (anti Newton Ring) glass over it to flatten the tranny. One can even wet mount it doing this.I've wet mounted 35mm with very good results, however I mostly do MF with Doug Fisher's aftermarket MF film holder. (It blows the doors off of the epson "cracker Jack toy" film holder) > > > > Jules
Message
Re: [Digital BW] scanning 5"x7" with epson 4870
2005-02-26 by btvarner
Attachments
- No local attachments were found for this message.