Digital BW, The Print

I am trying to use Roy's Lab Gray procedures but am having a problem 
(which may be that I am misunderstanding the procedure).

In PS I have edited the color settings to make QTR - Lab Gray the 
working space and this shows up in Print with Preview as the 
Document Source Space.

Then (still in Print With Preview) for the print space profile I 
enter the QTR-Gray Matte Paper profile. But then as soon as I move 
to other areas of Print with Preview, the print space profile 
changes by itself to QTR-Lab Gray - the profile disappears and is 
replaced by the working space!

Have I misunderstood what Stephen Kale means by "Then convert with 
perceptual rendering to QTR Gray Photo paper or matte paper ..." 

Any advice would be appreciated.

Alan Shapiro

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale 
<stevekale@b...> wrote:
> Ok well first of all you are mixing two things.  Better/faster is 
one option
> ie speed, and "better" should be used.  Resolution is another and 
I get
> banding with 1440 on my 2100 that doesn't occur with 1440 super.  
For dither
> I use Ordered.  But the issue at hand is first and foremost a very 
flat
> looking print.
> 
> 
> > From: guy washburn <guido02474@y...>
> > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > Date: Wed, 23 Mar 2005 09:48:35 -0800 (PST)
> > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > Subject: Re: [Digital BW] Quadtone RIP Faded print
> > 
> > 
> > Steve,
> > 
> > I have had banding with super that going to straight
> > 1440/better fixed.
> > 
> > Guy