Digital BW, The Print

I just sucked up all the Piezo ink I could with a 60ml syringe from the
center of the bottle caps. Then I turned the cartridges upside down, and
sucked the new ink (MIS) back down into the cartridges. Works like a
charm. You'll have to still print about 20 letter size prints of a 4
color flush image to get out all the old ink. I went from Piezo to the
MIS VM variable tone inkset, and had no problems. The two inks are
totally compatible.

Jerry




josh@... wrote:
> 
> Hi,
> 
> I am switching my MIS CFS system from Piezo ink to
> MIS VM ink and didn't particularly want the two to mix.
> 
> By detaching the tube from the "elbow joints" on top
> of the carts and moving the cart to a sink I can get a tube to feed
> water in from my cold tap.
> 
> My question is whether  water is the best for flushing out
> this pigmented ink from the foam in the cartridges ?
> 
> Presumably the ink is water soluble, or held in a solution ?
> 
> Thanks
> 
> Josh
> 
> PS - In the UK www.dabs.com is a good source for 1160 printers
> 
> 
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at:
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or "flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various resources on the homepage.
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/