Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "freduardook2000"
<freduardook2000@y...> wrote:
> i have a mis continious flow system with org b w colour
> and a 1200 epson printer
> 
> i first thought that my tubes are blocked 
> but now i cleaned them and the problem still was there
> so i tried to pull out some ink with a syringe without the tubes atached
> 
> on 2 colours i still feel a lot of resistance when i pull back the
> syringe   so the problem must be inside the cartridge 
> 
> any ideas how i could clean a cartridge 
> 
> sure a new one would be the easiest but i am not from usa and i dont
> have a credit card so it is very difficult to order stuff from usa
> 
> thanks for any help 
> 
> freduardo

just found out that now after a special treatment only 1 colour is
still blocked when i do a nozzle check 
curious is this :
when i print a test pattern the colour appears 
 
magenta in my case   

looikng at the nozzle check magenta is not visible and on the test
pattern it is fully visible not even a banding line  
this is getting more and more difficult

adios fred