Digital BW, The Print

Nope.  (Draw Lab space L* on a piece of paper - a 45 degree line from 0,0 to
100,100 - then draw a line from 0,16 to 100,96 - that's the difference.)
The ICC profiles did but there is not at present a way to make profiles for
a particular printer's L* output....unless Roy juices up his profile
generation software.


> From: John Moody <moodymz3@...>
> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Date: Fri, 3 Jun 2005 15:29:29 -0400
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Subject: RE: [Digital BW] Re: Holy Moly 4800!
> 
> Didn't the LAB Grayspace profile significantly address that issue?
> 
> Best regards,
> John Moody
> 
> -----Original Message-----
> From: DigitalBlackandWhiteThePrint@yahoogroups.com
> [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]On Behalf Of Steve Kale
> Sent: Friday, June 03, 2005 2:20 PM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: Re: [Digital BW] Re: Holy Moly 4800!
> 
> I should have added that the L* is very very linear.  I now a little worried
> about what I'll get on matte paper - remember the whole "QTR prints come out
> flat" discussion.....If L* is linear from dMin to dMax then we will have
> this problem again.