Digital BW, The Print

Michael,

The chip calculates ink usage based on some algorithm and is set to 
show empty well before the cartridge is really empty.  I think I 
recall reading that there is usually about 30% ink remaining when the 
chip says empty.  This probably varies by printer model.  As long as 
you are refilling your own, there won't be any wasted ink, but it 
would probably be a mistake to reset the chip and force it to run 
completely dry.  This could introduce air into the nozzle are cause 
problems.  

It would be better to refill your partially empty cartridge first, 
THEN reset the chip.  This will keep ink in the nozzle and prevent 
drying and clogging.  

Lou

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "michaelrosensf" 
<michael@m...> wrote:
> I'm in the process of upgrading from my 1160s and piezography to a 
2200 and QTR. With 
> the 1160s, when the printer showed solid red for "out of ink", I 
routinely removed the 
> cartridge and replaced it. After some combination of cleaning and 
waiting over night, this 
> usually allowed me to make several prints before actually running 
out of ink. (I learned this 
> from this forum, from Tyler Boley I think. Thanks Tyler or whoever!)
> 
> With the 2200 and chipped cartridges, is the printer really out of 
ink when it shows solid 
> red? Would using a chip resetter allow me to make some extra prints?
> 
> Michael