Digital BW, The Print

I would'nt necessary use a band saw except to get the large section off 
then I would use a round blade modified to fit in a laths jig and cut 
slowly and then use a razor on the dead edge.  Now how to do is to give 
a slight angle to blade, make sure the way you put the roll on the lath 
is when it is turning clockwise with the unwind of the paper being 
wound. Make sure the complete flap is tape to prevent tear and 
unwinding.  I have done this with all types of OPP and Lamination films 
including matting for cold lamination.  If the roll is smaller say less 
than 100 feet then just a sharp razor knife at this angle will work.  
Anthony

schrochem wrote:

>I have a 2200 and was wondering what options I have for matte paper in 
>13" width?  I know Moab Entrada has one with 3" core, what else?
>Can a 17" roll be "modified" with a bandsaw? LOL;)
>
>Thanks
>Scott
>
>
>
>
>  
>