Digital BW, The Print

I'm not sure if I understand everything in this message. But here goes, I 
have Canon 20D that has been modified by Hutech. The IR cut-off filter has 
been removed, and because the anti-aliasing was attached to that filter the 
camera has no AA filter. The filter that was removed was replaced by a 
specially coated clear filter to preserve auto-focusing.
My camera requires an IR filter in front of the lens, which makes difficult 
to shoot because you cannot see through the filter. In the fall Hutech will 
begin producing bodies that have an IR filter in front of the sensor, so 
there will be no filter on the lens and the camera will be dedicated to IR. 
Are not the manufacturers or after market modifiers coming close to a 
dedicated B/W camera?.

Gary
----- Original Message ----- 
From: <claudej1@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Tuesday, July 12, 2005 6:35 AM
Subject: [Digital BW] Digital Zone System via filters



OK, the whole point of doing a monochrome sensor is to REMOVE the
Anti-Aliasing filter because there is NO color aliasing. There is no  Bayer 
Filter Array
on the sensor to start with, so why would you want to fuzzy  up the image??
The main strength of a mono sensor is it's twice as sharp as  a color one. 
IOW,
it take twice as many Bayer Well Sites to equal the resolution  of a given
number of mono well site, assuming the optics can resolve both.

As a Foveon mentor back in 1999, after being an early Kodak adopter, I
learned this lesson well by comparing a cropped 3.2 megapixel (1.6k X 2K) 
capture
on the 3-chip prism camera, to a PhaseOne Lightphase AND  a Kodak 560. The
Phase One had a 6 MPx Philips Sensor and NO AA  filter. The 560 had a 6 MPx
sensor with AA filter. By far, Kodak's was the worst  performer. Foveon was 
the
best, by a nudge, over the Phase One (that back was on  a Hasselblad). We 
are
talking about $30,000 outfits here and not today's amazing  camera that cost 
less
than $1,000. So those of us who spent that kind of cash  were SERIOUS about
digital performance and had to make sure we had clients to  pay for it.

By the same token, Foveons X3 color sensor in the Sigma SD-10 (best cheap
B&W capture also) has full color resolution at every well site, and so, at 
3.5
MPx native capture, performs as well or better than most 8 MPx cameras as 
far
as resolution BECAUSE there is not AA or BAYER filter array.

Back in 2000, Foveon had a prototype 22x22mm sensor that was monochrome. It
was all CMOS, 4k x 4k (16 megapixels). Greg Gorman did a shot of a Cowboy in
the  proto camera that had accepted Canon lenses. They made a 4 foot by 8 
foot
print  (cropping out 1/2 the image area captured by the sensor!!). At
Photokina,  everyone thought the image was better than 4x5 film. It would 
have taken a
36  MPx (6k by 6k) BFA color sensor to perform better than this, assuming 
the
optics  could do it.

This may bee deemed as my opinion, but I have image files to prove it. I'm
currently on my 30th digital camera in 10 years.

I only wish the Foveon technology would catch on and they could make bigger
sensors. This way you would have all the shapness benefits of a mono sensor,
with all of the post-process manipultations of scene renderings during the
B&W conversion in Photoshop.

In the mean time, I suspect that if Ken Boydston of MegaVision decides to
make a Mono Back that also does IR captures, like everything else he has 
done,
someone will copy it.

Claude

In a message dated 7/10/2005 10:47:24 A.M. Eastern Daylight Time,
DigitalBlackandWhiteThePrint@yahoogroups.com writes:

I'd  propose an answer to this question. Such a sensor would have no
Bayer  mosaic, and would have a user-removable IR blocking filter (or no
blocking  filter at all). In my ideal camera, it would have an
anti-aliasing filter  (referred to as "blur" filter here earlier), though.





[Non-text portions of this message have been removed]



Please visit the Group Homepage to check the Files, and other resources as 
they are often being updated.

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to 
unsubscribe, please edit your Membership preferences by visiting this same 
page.

Please follow these basic guidelines:
- As threads develop, trim off excess portions of earlier messages to keep 
them short.
- Good manners are required at all time. No personal attacks or flames. 
Hostile, aggressive or argumentative users may be removed from the 
membership without notice.
- Keep your posts and threads related to the group topic of digital B&W 
printing. Users who persistently make off-topic posts may be removed from 
the membership.
- By posting on this forum you agree to abide by the group rules and 
guidelines, and to abide by the actions and decisions of the group Owner and 
Moderators. See "Group Topic, Rules and Guidelines" in the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/

BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT 
YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND 
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY 
DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, 
GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND 
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY 
TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR 
ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY 
THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER 
MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.

Yahoo! Groups Links