Digital BW, The Print

Scott

You can download Profilemker 5.0.3 from GretagMacbeth
and use the MEASURE Tool to drive the I1 measure the
patches of the 21 step wedge provided by QTR. The
MEASURE tool allows you to run this in demo mode i.e.
without a GM dongle.

There is also a very capable program called Babelcolor
at www.babelcolor.com which costs only $65 and has a
very good measure tool (measures directly in density
as opposed to lab values)

Either approach will get you the data you need to
linearize the QTR curve

woody spedden

--- Scott McLoughlin <scott@...> wrote:


---------------------------------
A few very basic questions:

(1) I have QTR (2.2.3). I've heard mention of a new
release in the
last few weeks.  Will the new release make my first
attempt easier?

(2) Am I correct in that I an use the GM i1 to make a
profile?

(3) Based on a recent thread, I'm a bit confused on
the GM i1 software
I'll need to make a profile.  Something about using a
demo version or
something of their more expensive software.

There was also mention of a piece of 3rd party
software for $65 or so
that might do the trick.

(4) Should I follow the tutorial "User Guide" PDF to
make a profile
or is there a better source of "How To" information?

(5) I'm a PWP user. Can I do this without PS?

Thanks much.

Scott





Please visit the Group Homepage to check the Files,
and other resources as they are often being updated.

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily
digest, or you wish to unsubscribe, please edit your
Membership preferences by visiting this same page.

Please follow these basic guidelines:
- As threads develop, trim off excess portions of
earlier messages to keep them short.
- Good manners are required at all time. No personal
attacks or flames. Hostile, aggressive or
argumentative users may be removed from the membership
without notice.
- Keep your posts and threads related to the group
topic of digital B&W printing. Users who persistently
make off-topic posts may be removed from the
membership.
- By posting on this forum you agree to abide by the
group rules and guidelines, and to abide by the
actions and decisions of the group Owner and
Moderators. See \ufffdGroup Topic, Rules and Guidelines\ufffd in
the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/

BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE
DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY
UNDERSTAND AND AGREE THAT THE \ufffdOWNER\ufffd AND \ufffdMODERATORS\ufffd
OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE
LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING
BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN
IF THE  \ufffdOWNER\ufffd AND \ufffdMODERATORS\ufffd OF DIGITAL BW, THE
PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE
INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO
GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF
YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR
CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE
PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING
TO THE DIGITAL BW, THE PRINT YAHOO GROUP.


    
    
---------------------------------
  YAHOO! GROUPS LINKS

  
    Visit your group "DigitalBlackandWhiteThePrint" on
the web.
   
    To unsubscribe from this group, send an email to:

DigitalBlackandWhiteThePrint-unsubscribe@yahoogroups.com
   
    Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.

  
---------------------------------