On Jul 16, 2005, at 5:46 AM, hkbenji wrote: > Hi all, I hope that someone might be able to help me... > > For BW, I use a hp 7960 printer with the grey cartridge. I'm very > interested in creating icc profiles for that printer, so Roy's new > stand-alone application seems to be perfect for that. I'm just having > a few problems getting it right. > > OK, so first - printing the QTR-21 gray target; should I use the > embedded 2.2Gamma profile or discard it and print as a untagged gray > file? Whatever gray workspace you prefer - gamma 2.2 or QTR gray which is what I use > Then, using Photoshops print with preview - I should set it up > as "No Color Management", yes? Yes > Next, scanning of the target, appears to be working fine. > > Then, linearizing - I'm a bit lost here; I assume this requires the > use of the actual QTR program? I've never used QTR before, so I'll > have to do some reading up on that one. You have to assume that your HP output is linear or near linear. You can't use QTR. > > Assuming I've got the linearization done, and got the icc-file; do I > use that on a grayscale or RGB file? grayscale > If grayscale, what Gamma? doesn't matter, but use the grayspace you used to make the icc > Can I > use it to Soft-Proof? If so, do I use the Perceptual Rendering Intent > or something else? Yes, perceptual. > > How about in the Print with Preview Setup - Perceptual or Relative > Col.? In print with preview just select the icc profile under printer space and use perceptual > > Many Thanks for your help! > > Ben > > > > > Please visit the Group Homepage to check the Files, and other > resources as they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you > wish to unsubscribe, please edit your Membership preferences by > visiting this same page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages > to keep them short. > - Good manners are required at all time. No personal attacks or > flames. Hostile, aggressive or argumentative users may be removed > from the membership without notice. > - Keep your posts and threads related to the group topic of digital > B&W printing. Users who persistently make off-topic posts may be > removed from the membership. > - By posting on this forum you agree to abide by the group rules > and guidelines, and to abide by the actions and decisions of the > group Owner and Moderators. See “Group Topic, Rules and Guidelines” > in the Files section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE > PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE > “OWNER” AND “MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL > NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, > CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, > DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER > INTANGIBLE LOSSES (EVEN IF THE “OWNER” AND “MODERATORS” OF DIGITAL > BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF > SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE > THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO > OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR > CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO > GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE > PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > > > > > >
Message
Re: [Digital BW] QTR 2.30 icc - Help!
2005-07-16 by Carl Schofield
Attachments
- No local attachments were found for this message.