Digital BW, The Print

Unfortunately the 7600/9600 machinses have a different damper setup: 
the're all attached to a frame that makes it necessary to pull all the 
dampers. That creates huge problems that require many cleaning cycles 
to clear up. If they have used that or a similar setup in the K3 prin 
ters, you don't want to go that route.


Steve Karafyllakis
> 
> 
> If you drained the damper, probably one head cleaning would do the 
> job. That's about all I need for my 9500, but then again it has fewer 
> nozzels so you may need more than one.