Digital BW, The Print

Er nope you can rear feed the 21/2200 in OS-X.  It is really easy.  Lever
down.  Feed paper through rear slot aligning with side of printer.  Insert
until 1cm past front rollers (looking down through the lid).  Lever back up
to the envelope setting.  Press paper button and watch the printer align
itself.  Print.  None of this has anything to do with the driver.  Works
like a charm.


> From: rgoldman2 <rgoldman@...>
> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Date: Wed, 21 Sep 2005 17:09:36 -0000
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Subject: [Digital BW] Re: tips feeding 300 gsm/2200 ?
> 
> Are you using a MAC? I believe that the 2200 driver and OS10 do
> not speak to eachother when it comes to backloading. I.E. you
> can't do it. That is so strange. When I was printing on my 2200
> with Moab Entrada, I had to top load and it was a real struggle. I
> could not figure out a consistent method for feeding the paper
> with out getting a jam. I think if you tilt it forward a bit (be sure it is
> not curled) and keep some slight even pressure on the top as it
> feeds in you may have more frequent success.
>