Digital BW, The Print

Thanks RGoldman... 

I asked here because I'd thought topics other than MIS could be
addressed. 

Yes, I've had awkward (but 100%) success feeding 300gsm Entrada
Natural from the top...it's a convenience on my desktop, though it
requires the attentions you've described and is harder in high humidity.

Oddly, I ran into much more difficulty with whitened Entrada than I've
had with Natural...and I do think it has a different physical spring
to it.

I did get immediate real help from the Yahoo 2200 site... only one
snippy response that failed to show the courtesy to address the
question. As some of us know, the manual doesn't fully address the
heavy paper issue. 

Incidentally, I use a PC...irrelevant to the printer's mechanics Vs
heavy paper.



 
--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "rgoldman2"
<rgoldman@n...> wrote:
> Are you using a MAC? I believe that the 2200 driver and OS10 do 
> not speak to eachother when it comes to backloading. I.E. you 
> can't do it. That is so strange. When I was printing on my 2200 
> with Moab Entrada, I had to top load and it was a real struggle. I 
> could not figure out a consistent method for feeding the paper 
> with out getting a jam. I think if you tilt it forward a bit (be
sure it is 
> not curled) and keep some slight even pressure on the top as it 
> feeds in you may have more frequent success.