Digital BW, The Print

Bob

Yes on the MAC version the same data is printed at the bottom of the 
printout but interestingly no nozzle check. However the software does 
ask before printing if the user would like to perform a nozzle check. 

Peter
--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Bob Frost" 
<bob@f...> wrote:
> Peter,
> 
> On my Windows version under the chart it prints all the info you 
entered 
> into the program (for reference) and does a nozzle check and prints 
that for 
> reference. I thought my nozzles were OK, but when I looked at the 
nozzle 
> check printed with the target, I could see they weren't - so back 
to square 
> one. Useful to have it there as a record that your calibration 
was/was not 
> OK.
> 
> Trim it after printing - you get a few bits to use for tests.
> 
> Bob Frost.
> 
> ----- Original Message ----- 
> From: "bwbonkers" <PeterDLevis@a...>
> 
> Agree but all I wanted to do was trim the grey border a little so 
the
> target fits onto a single sheet of A4. The colour patches would
> remain as they are.