Digital BW, The Print

I'll chime in with my $.02 on the MIS Plug problem...

From the moment I saw them, I knew that these plugs would be trouble.
 So far, I've only had one leak, but that was my fault due to
over-agressive removal of the plug.

But for new refills, I'm going to do away with reusing the MIS plugs.
 I am just going to buy a small tube of silicone rubber sealant. and
put a daub of it over the fill-hole when I'm done.  In a couple of
hours or less, it will be cured with a good, almost guarantied
air-tight seal, and will be easily removable (and disposable).

Or you could go with the glue-gun method, but sometimes those are a
little harder to remove.

DRK
>