Digital BW, The Print

Carl,

I just printed the 51 step target again with 2880/better, and a -50% ink limit set in the 
driver.  Using the hair dryer to speed drying, followed by a quick scan with the i1 resulted 
in a file with no reversals - so I guess it's an ink limit issue.  I'll try reducing the ink limit 
back down toward 25% and see where the problem comes in.

You wrote in your last post, "I looked at the IJM quad files and they seem to all be limited 
at 95% (which seems quite high)."  Are you saying you looked at K7 curves for QTR from 
IJM or did you look at QTR curve files from IJM for the older Piezo products?  The only 
curves I have found for K7 are .quad files which I thought were un-editable/viewable.

Thanks for your help.

Best regards,

Josh

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Carl Schofield <scho@m...> 
wrote:
>
> Josh,
> 
> My default ink limit for the k7 inks (Epson 4000) on HPR is 75%.  I  
> looked at the IJM quad files and they seem to all be limited at 95%  
> (which seems quite high).  So, if you are reducing ink limit in the  
> driver by 25% I guess that would put the ink limit near to what I'm  
> using.
> 
> Carl
>