Digital BW, The Print

You can open and look at the curve in the .quad file using  text  
edit.  The limit used is in the file header.

On Dec 1, 2005, at 3:16 PM, joshhackney wrote:

>
> Carl,
>
> I just printed the 51 step target again with 2880/better, and a  
> -50% ink limit set in the
> driver.  Using the hair dryer to speed drying, followed by a quick  
> scan with the i1 resulted
> in a file with no reversals - so I guess it's an ink limit issue.   
> I'll try reducing the ink limit
> back down toward 25% and see where the problem comes in.
>
> You wrote in your last post, "I looked at the IJM quad files and  
> they seem to all be limited
> at 95% (which seems quite high)."  Are you saying you looked at K7  
> curves for QTR from
> IJM or did you look at QTR curve files from IJM for the older Piezo  
> products?  The only
> curves I have found for K7 are .quad files which I thought were un- 
> editable/viewable.
>
> Thanks for your help.
>
> Best regards,
>
> Josh
>
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Carl Schofield  
> <scho@m...>
> wrote:
>>
>> Josh,
>>
>> My default ink limit for the k7 inks (Epson 4000) on HPR is 75%.  I
>> looked at the IJM quad files and they seem to all be limited at 95%
>> (which seems quite high).  So, if you are reducing ink limit in the
>> driver by 25% I guess that would put the ink limit near to what I'm
>> using.
>>
>> Carl
>>