Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "djon43" <djon43@y...> 
wrote:
>
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Roy Harrington"
> <roy@h...> wrote:
> >
> > 
> > If you are having difficulties or think there's a bug you should send me
> > some information about it.  At a minimum I need to know the OS, the
> printer, 
> > inks and the QTR version as well as a detailed description.
> > 
> > Roy
> 
> 
> Roy,  2.3.10 . It's XP Home, Epson 2200, OEM pigs. The problem is with
> 11X17, not 11X14, not 8.5X11, I've not tried other sizes. 
> 
> For comparison I've just printed scans as large as possible on 11X17
> via Qimage and QTR...Qimage centered with border, QTRgui printed the
> long side (17") slightly over the edge, no border on that side, wide
> border on the other. Border couldn't be produced on the one side 
> despite various adjustments of border settings.  
> 
> I'll refrain from updating until someone indicates that the new
> release functions correctly with 11X17. 
> 

You need to have 1/8 in borders all around on the 2200.  So if the paper
is 11x17 you should format a max of 10.75 x 16.75.

Although I can understand a reluctance to upgrading, it not too difficult to
go back and forth -- run Uninstall between or use a different install folder.

When you say "slightly over the edge", which edge is this?  The one closest
to the resting head position (i.e. on the right as paper comes out)  or the
edge on the far side?   There are a lot of pieces to the measurement, see
how they add up -- you have 1/8in hardware margin, the QTRgui margin, and
Qimage margin, all times 2 for left & right + the image size.

Roy