Digital BW, The Print

Phil,

Thanks for the info.  I notice that 3M makes several Adhesive Sprays
http://www.framingsupplies.com/3M/InformationAdhesiveSprays.htm


Options so far are:
1.  3M Vac-U-Mount (or something similar, e.g. PhotoMount?) w/hand roller
2.  Dry mount print in sections
3.  Gudy 831 Cold-Mounting Adhesive (see my earlier post)
4.  32 x 40 inch plexiglass to perhaps flatten out ripples

Ken




-- In DigitalBlackandWhiteThePrint@yahoogroups.com, Phil Lindsay
<fotophil@p...> wrote:
>
> Hi:
> 
> 3M makes a spray adhesive called Vac-U-Mount". My vacuum press can  
> not handle 24 x 36 so I had to use hand roller pressure instead. It  
> seems to have worked.
> 
> Phil Lindsay
> On Jan 1, 2006, at 8:28 PM, Steven Karafyllakis wrote:
 
>  --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "kenseidman"
>  <Seidmank@e...> wrote:
>  I've just mounted my first 24 x 30 inch print onto foamcore using
>  the
>  tape hinge method.  Results are not satisfactory for this size and
>  paper (Kodak Pro Glossy paper).  Ripple is evident.  I've got a dry
>  mounting press but it is not large enough for this size print
>  (unless
>  I try to dry mount in sections, which seems error prone to me ?).
> 
>  Any suggestions for other mounting methods for such a large print?
>  Thanks,
>  Ken