Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale 
<stevekale@b...> wrote:
>
> OK I just ran the calibration charts I had printed under the cold tap 
(so
> HPR, EAM and EPSG).  There is definitely run-off from the black ink 
and ever
> so slightly the (dark) cyan. Although, nothing from the other colours 
this
> is not good.  
> 
> (I also ran a K3/Eboni MK nozzle check pattern under water in the same
> manner.  No issues with that.)
> 
> Steve


Thanks. You might try some extra limiting with QTR to see if the run 
off was just from too much ink, which can happen even with Eboni, or 
the inks that I use. Yes, I'm trying to remain positive about these new 
inks, and give them a fair chance at life.