Digital BW, The Print

Ole 

Can you post some results from a single K channel curve with IJC/OPM?  Also
presumably you did a calibration chart for your IJC/OPM curves work.  If you
could post some data for the LK that would be helpful.

Steve


> From: Steve Kale <stevekale@...>

> <snip>
> You must have different ink than what I have.

<snip>
>IJC/OPM and QTR use the same driver at their core and I
> would not have thought there'd be that much difference simply from the 7600
> vs the 2100 - at least not at dMax.
> 

> 
> 
>> From: Ole Christian <piezoo@...>
>> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
>> Date: Mon, 16 Jan 2006 00:12:08 +0100
>> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
>> Subject: [Digital BW] NANOCHROME BO
>> 
>> Greetings, I have been fiddling with the Nanochrome for BW prints.
>> Most of my test have been done using the Bowhaus IJC/OPM software on
>> an Epson 9600. I find that the neutrality that both the Black/Light
>> Black have in themselves a real benefit. DMAX is also very good. On
>> PhotoRag 308 I have measured DMAX very close to 2.4. Nothing I have
>> printed with sofar have matched this black level. I am very impressed
>> with these inks.
>> 
>> -ole/norway