Digital BW, The Print

One nozzle was plugged -- #4 counting from the left. I did a couple of
cleaning cycles and re-printed the step wedge, cyan only, and it looks
exactly the same as before. At this point I'm going to work with MIS
to get me some replacement cartridges, and then see what I have.
Thanks for all your help.

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark"
<paul.roark@v...> wrote:
>
> I assume that is the cyan ramp you printed.  It indicates the LC is
missing.
> Are you sure your nozzle checks are OK?
> 
> Paul
> www.PaulRoark.com 
> 
> 
> > -----Original Message-----
> > From: DigitalBlackandWhiteThePrint@yahoogroups.com
> > [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of
> > chwhitaker
> > Sent: Monday, January 16, 2006 2:06 PM
> > To: DigitalBlackandWhiteThePrint@yahoogroups.com
> > Subject: [Digital BW] Re: MIS UT2 Carbon prints very non-linear
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark"
> > <paul.roark@v...> wrote:
> > >
> > > I'm not sure a too-dark LC would cause the problem you're having,
> > but it's
> > > possible.  Try printing an RGB 21-step test strip with only the red
> > curve at
> > > its default position, and the green and blue curves horizontal --
> > i.e., the
> > > magenta and yellow inks turned off.  On the monitor the RGB image
> > will be
> > > cyan.  With No Color Adjustment selected in the driver, the ramp
> > will show
> > > if the LC is way to dark -- the ramp will be awful.  (If you don't
> > know how
> > > to make this curve, let me know and I'll send one off list.)
> > >
> > > Paul
> > > www.PaulRoark.com
> > 
> > Finally got the curves you described. The results are at
> > http://www.charles.whitaker.name/NoGreenNoBlue.jpg. Do these results
> > support a very dark light cyan? Thanks.
> > 
> > 
> > 
> > 
> > 
> > Please visit the Group Homepage to check the Files, and other
resources as
> > they are often being updated.
> > 
> > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> > 
> > If you wish to receive no emails or just a daily digest, or you
wish to
> > unsubscribe, please edit your Membership preferences by visiting
this same
> > page.
> > 
> > Please follow these basic guidelines:
> > - As threads develop, trim off excess portions of earlier messages
to keep
> > them short.
> > - Good manners are required at all time. No personal attacks or
flames.
> > Hostile, aggressive or argumentative users may be removed from the
> > membership without notice.
> > - Keep your posts and threads related to the group topic of
digital B&W
> > printing. Users who persistently make off-topic posts may be
removed from
> > the membership.
> > - By posting on this forum you agree to abide by the group rules and
> > guidelines, and to abide by the actions and decisions of the group
Owner
> > and Moderators. See "Group Topic, Rules and Guidelines" in the Files
> > section:
> > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> > 
> > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE
PRINT
> > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
> > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE
LIABLE TO
> > YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
> > EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF
> > PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE
> > "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE
BEEN
> > ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i)
THE USE
> > OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii)
> > UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR
DATA; (iii)
> > STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT
> > YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE
> > PRINT YAHOO GROUP.
> > 
> > Yahoo! Groups Links
> > 
> > 
> > 
> >
>