Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Greg" 
<dfaprinting@...> wrote:
> Since it uses the Profiler engine, you will still need a UV 
filtered 
> spectro. In all the years that Xrite/Monaco has had to change 
things, 
> they still consider the job of filtering best left to the hardware.
> 
> However, if you own PMP (or any other CMYK profile creation 
software) 
> you should be able to use CMYK profiles generated from it in the 
RIP. 
> Linearization may or may not be possible, that all depends on 
whether 
> they allow you to enter values by hand. Most manufacturers have cut 
> this feature, which is really too bad as it then locks you into 
using 
> their approved hardware.
>


NOTE: the above message has about a 12 hour delay!!!