Digital BW, The Print

Nij, 

Again, I am not a techie....but I believe the tech did say that even with the power off it is risky to move the carriage by hand.  He suggested using ONLY the buttons on front to make the carriage move to the left.  

Steadman
  ----- Original Message ----- 
  From: Nij 
  To: DigitalBlackandWhiteThePrint@yahoogroups.com 
  Sent: Friday, January 11, 2002 10:32 PM
  Subject: RE: [Digital BW] Re: how to move carriage manually?


  Only do that with the printer switched off! You can keep it plugged in
  though!

  Nij

  > -----Original Message-----
  > From: johnvphoto [mailto:jvlist@...]
  > Sent: 12 January 2002 00:06
  > To: DigitalBlackandWhiteThePrint@yahoogroups.com
  > Subject: [Digital BW] Re: how to move carriage manually?
  >
  >
  > frank wrote:
  > > do you know how to release the carriage, on an 1160, to
  > enable moving
  > > it to the left manually ?
  >
  > There is a big white gear on the left of the carriage - roll the top
  > towards you about a quarter turn. That will move the white
  > locking tab down - it's visible - to release the head.
  >
  > Best,
  >
  > John V.


        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       

  Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at:

  http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

  Please follow these basic guidelines:
  - Include your full name with your message.
  - Include the address of your website, if you have one.
  - As threads develop, trim off excess portions of earlier messages to keep them short.
  - As the topic of a thread changes remember to change the subject header.
  - Good manners are required at all time. No personal attacks or "flames."
  - Complete your Yahoo profile.
  - Before posting a question, search the message archives and the various resources on the homepage. 




  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]