Digital BW, The Print

Hello Karl,

You might want to try taping a 2-4 inch leader to the media, then add
the same amount of offset to the top margin for printing. Hopefully
the printer only tries to detect the first few inches. I've done this
all the time to force the printer to pull in very thick media.

I think the best way to do this is tape your media on top of the
leader, and not the other way around. You may want to try a couple of
test feed to make sure if this is the correct way to do it. And tape
them together using small pieces of tape about 2-3 inches apart should
be sufficient.

Good luck,
--nick

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "wolzphoto"
<wolzphoto@...> wrote:
>
> Lyson puts out a portfolio binding system called Stonehinge, ...
> I've tried putting masking tape over the clear portion, but the 
> printer saw right through that ruse.  Has anyone else come up against 
> this situation?  Any workarounds?
> 
> Thanks in advance,
> 
> Karl Wolz
>