Digital BW, The Print

Just put a small piece of tape over the opeing and set them upright in a safe place.  I just use a small box for this.
   
  It is probably wise to do one or two cleaning cycles when you change the inks out. Then you're good to go.  The entire swap process should take about 3-5 minutes.  
   
  Have fun.
   
  Tom Baker

chriskjezp <chriskresser@...> wrote:
          --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Tom Baker <tbaker1328@...> wrote:
>
> There must have been some misunderstanding. QTR works quite well with the MIS R2 ink 
set on the 220 printer. I use both the b&w inkset and the MIS PRO inks with the 220, 
swapping them out when I need to print color.
> 

Tom,

This is exactly what I was hoping to hear. I think this seals the deal for me. 220 w/ MIS PRO 
for color and MIS R2 for B&W. Now I can get back to taking pictures and printing them!

Any particular tips I should be aware of when swapping cartridges, i.e. storing them or 
cleaning them so the ink doesn't dry/clog?

Thanks,
chris



         


[Non-text portions of this message have been removed]