Digital BW, The Print

Thanks Paul.
Actually,it sounds very much like my problem but I've allready gone
down the maintenance kit plus dampers path and replaced all of the
items you mentioned except the head. None of it helped. I'm hoping
that a new head will take care of it and it isn't in the electronics.
The main difference from yours is that I didn't have clogs or missing
jets first.

Hope all works out well for you(and me).

In my case it will be mothballed for about 6 months every year so I
will have to figure out a way to make it survive the abuse.

Meanwhile the old 3000 I have is still ticking along nicely. I just
brought it back up with the UTFS inkset after moving it North as well.

Regards
Duane


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark"
<paul.roark@...> wrote:
>
> Duane,
> 

> 
> I'm not sure if this is the same as your problem, but as noted
> above,one of
> the symptoms I had was "spitting" lots of ink blobs on and by
> the side of the print image.    
>  I didn't have that problem with the old 3000, probably because I
kept > plain paper in the tray and sometimes just used it for smaller and
> non-photo work.  
> www.PaulRoark.com
>