Digital BW, The Print

Thanks, Roy.  After testing yesterday and talking with my lab guy, we discovered that the 
cutom sizes don't work with either of the drivers - Epson or QTR.   Non custom sizes work 
fine.

I spoke with Eric Neilson and he suggested creating custom sizes in the print setup...but 
could find no such place to do so.  Is there a solution, or are we stuck with using Epson 
supplied standard paper sizes only?

Thanks,
-Barry

Barry Snidow


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Roy Harrington" <roy@...> 
wrote:
>
> 
> The problem is too short a print.   There is a 7 inch minimum length.
> Unfortunately custom paper sizes in OS X are independent of which printer you
> are using so OS X can't tell you the size is too small.  Illegal sizes default to 
> Letter size which is what you got.   
> 
> Roy
> 
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Barry" <barrysnidow@> 
> wrote:
> >
> > We are trying to set up a 9600 to run Harrington's QTR.  Everything is loaded and 
> installed 
> > and we can print, but no large prints...or at least no cutom sizes.  When attempting 
> to run 
> > a test strip image (38"w X 4"h) on a custom size paper (42"w X 5"h) using QTR the 
> printer 
> > only prints about 8"w of the strip.  Orientation is correct, but only one end of the 
> image is 
> > printed the full 4" high.  (Final image = 8"X 4").  The printer acts as if it were loaded 
> with 
> > letter size paper (8.5" X 11").
> > 
> > When printing color images using PS CS2 and Epson drivers we have no such 
> problems.
> > 
> > We're using Mac G-5, OS-X 4.7, PS CS2, USB.  
> > 
> > My lab supervisor has been working to resolve this problem for 2 days, so it is out 
> of 
> > desperation I seek your collective wisdom and advice.
> > 
> > -Barry
> > 
> > Barry Snidow, Coordinator
> > Photography Program
> > North Lake College
> > Irving, TX
> > 972-273-3567
> >
>