I had problems with Hahnemuhle Fine Art Pearl when using the normal top loader. Try using the single sheet guide where the roll paper goes. Remember to select Manual-Roll as the printing source. It talks about it on page 16 of my manual. Tom On 9/20/06, ajberky <alanberkson@...> wrote: > > I recently received my first order of Crane Silver Rag in 8.5x11 and > 13x19 and tried some test prints on the 2400. I used the 8.5x11 > sheets and had some trouble getting the printer to load the paper > normally from the top. I tried a number of times to auto load then > printed when I was finally successful. The first few were ok - used > the Crane's profile, though my calibrated monitor (with eyeone) was > quite a bit lighter than the muddy print. This was disconcerting but > even more is that the most recent print has an ink splotch at the > lower corner and some random ink splatters near the bottom 1/3. > Before I commit to any more printing I would like to know if anyone > has has a similar experience and any help for a solution. I have been > using the printer fairly sucessfully with ilford galerie smooth papers > - mainly in ABW and using the ilford profiles for toned images. > > > > > > > Please visit the Group Homepage to check the Files, and other resources as > they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to keep > them short. > - Good manners are required at all time. No personal attacks or flames. > Hostile, aggressive or argumentative users may be removed from the > membership without notice. > - Keep your posts and threads related to the group topic of digital B&W > printing. Users who persistently make off-topic posts may be removed from > the membership. > - By posting on this forum you agree to abide by the group rules and > guidelines, and to abide by the actions and decisions of the group Owner and > Moderators. See "Group Topic, Rules and Guidelines" in the Files section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU > FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY > DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, > GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE "OWNER" AND > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE > POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY > TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR > ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY > THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER > MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > > > > > > > > > [Non-text portions of this message have been removed]
Message
Re: [Digital BW] Epson 2400 and Silver Rag Printing
2006-09-20 by Tom Husband
Attachments
- No local attachments were found for this message.