Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: [Digital BW] Ink drydown affect on calibration process

2006-10-02 by Walt Mucha

Hi James,

It's a good idea to wait 24 hrs. before measuring calibration patches for any type of profiling or curve creation just to be on the safe side. Some paper/ink combos will take that long. Others, as you have found out, don't require that much time.

Walt

>-----Original Message-----
>From: James Haney [mailto:jhaney@...]
>Sent: Monday, October 2, 2006 06:05 AM
>To: DigitalBlackandWhiteThePrint@yahoogroups.com
>Subject: [Digital BW] Ink drydown affect on calibration process
>
>I noticed something important this weekend as I was working to tweak  
>some QTR profiles.
>
>I was comparing tones from old patches to some that were freshly out  
>of the printer and finding some hard to explain differences.
>
>In trying to figure out what was going on I got out a patch from the  
>night before and they were much darker.
>
>Basically I noticed that the 100% patch of Museum Black on Photo Rag  
>takes at least 2-3 hours to dry down to its end density.
>
>Patches that read 1.53 five minutes out of the printer read 1.58  
>after an hour and 1.63 after drying over night.
>
>This could certainly account for some challenges I have had in the  
>past getting smooth ramps.
>
>This is definitely going to change my calibration technique.
>
>James
>
>
>Please visit the Group Homepage to check the Files, and other resources as they are often being updated.
>
>http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
>If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page.
>
>Please follow these basic guidelines:
>- As threads develop, trim off excess portions of earlier messages to keep them short.
>- Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice.
>- Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership.
>- By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See ?Group Topic, Rules and Guidelines? in the Files section:
>http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
>
>BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE ?OWNER? AND ?MODERATORS? OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  ?OWNER? AND ?MODERATORS? OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
> 
>Yahoo! Groups Links
>
>
>
>
>
>
> 
>
>
>
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.