Digital BW, The Print

Thanks Manuel and Tobie for the insights. Seems the way to go. Read the 
articles and some quastions aroused:
Paul writes about EZ BW inks,: looks like the complete K3 set from MIS
would 
do the same,right? (MIS bulk ink with spongeless carts is a much
better idea 
then Epson inks...) If matched to QTR,I can´t see a better way.
Then,if using the QTR+MIS K3,there the point: Clinton describes a 
hit-and-miss approach to adjusting the neutrality of the prints. My 
experience with this way tells me it not that simple. Would then the 
PrintFixPro work well with the K3,and could it be the "final"
solution? (for 
now,of course,as usual...)
Then about the black ink. As I read in MIS pages,it seems a little
confusing 
to be able to print in semmi-matte papers like Ilford Smooth Pearl. It's 
only a matter of changing the black from Ebony to photo and also the
chip,or 
there's something else? What about universal black in real world? 
BTW,lightfastening times of 80 or 200 years means the same for
me.Unhappily 
I won't last that long...it's more about the deepness of the black...
Best,
André
_____________________________________________________________
>
> 1a. Same printer for BW and color
>    Posted by: "Andre Vallejo da Silva" mastologia@... andrevallejo
>    Date: Sat Apr 14, 2007 5:55 pm ((PDT))
>
> This is a recurrent issue,but as gear is changing all the time...
>
> Is there a current printer,with more than two black inks (three would
> be ideal)A3+ format,that can be fed with MIS pigment bulk ink and that
> by using the  right driver,will be able to print in color and neutral
> BW(using the black and gray inks only)? Or am I demanding to much? (yet)
>
> Maybe the R1800 could be used to do that if there was the proper
> driver and the right profiles made with,for example PrintFixPro?
>
> Best,
> André
>
>
>
> Messages in this topic (3)
> ________________________________________________________________________
>
> 1b. Re: Same printer for BW and color
>    Posted by: "Manuel Toledo Quinones" mtoledo@... matoqui
>    Date: Sat Apr 14, 2007 7:09 pm ((PDT))
>
> André,
>
> With the R2400 you get very good color prints, and also can use the
> Advanced Black and White (ABW)  mode, which produces very nice B&W but
> uses some color. Alternatively, you could use QTR and use only the
> black inks but I think that in most papers the print will not be
> neutral. If you add some color you can get neutral prints with QTR and
> still avoid the yellow pigment, which is less lightfast than the other
> colors. ABW uses some yellow. The R2400 also produces nice B&W prints
> in rgb mode, provided that a good profile is used.
>
> The following sites have very good information that is available
> thanks to the generousity of Clinton Jones and Paul Roark, two of the
> experts of the group. You might find them usefull if you decide to
> consider the R2400.
>
> http://www.cjcom.net/digiprnarts.htm
>
> http://www.paulroark.com/BW-Info/2400.pdf
>
> Best wishes,
>
> Manuel
>
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Andre Vallejo da
> Silva" <mastologia@...> wrote:
>>
>> This is a recurrent issue,but as gear is changing all the time...
>>
>> Is there a current printer,with more than two black inks (three would
>> be ideal)A3+ format,that can be fed with MIS pigment bulk ink and that
>> by using the  right driver,will be able to print in color and neutral
>> BW(using the black and gray inks only)? Or am I demanding to much?
(yet)
>>
>> Maybe the R1800 could be used to do that if there was the proper
>> driver and the right profiles made with,for example PrintFixPro?
>>
>> Best,
>> André
>>
>
>
>
>
> Messages in this topic (3)
> ________________________________________________________________________
>
> 1c. Re: Same printer for BW and color
>    Posted by: "CDTobie@..." CDTobie@... cdtobie
>    Date: Sat Apr 14, 2007 7:58 pm ((PDT))
>
>
> In a message dated 4/14/07 8:55:19 PM, mastologia@pobox.com writes:
>
>
>> This is a recurrent issue,but as gear is changing all the time...
>>
>> Is there a current printer,with more than two black inks (three would
>> be ideal)A3+ format,that can be fed with MIS pigment bulk ink and that
>> by using the right driver,will be able to print in color and neutral
>> BW(using the black and gray inks only)? Or am I demanding to much?
(yet)
>>
>> Maybe the R1800 could be used to do that if there was the proper
>> driver and the right profiles made with,for example PrintFixPro?
>>
> No, the single black and no grays in the R1800 won't do this for
you. But 
> the
> exchangable blacks and two grays in the 2400 are capable of this, and 
> color
> at the same time; and with PrintFIX PRO 2.0, you can print both
color and 
> B&W
> through the same workflow and profile.
>
> C. David Tobie
> Product Technology Manager
> ColorVision Business Division
> DataColor Inc.
> CDTobie@...
> www.colorvision.com