Digital BW, The Print

Thanks for the response, Evan.  The problem is that VFA is grayed out in the
Print Setup so I can’t select it.  And believe me, I have read the manual ­
more than once.  I did try the tray behind the regular paper holder and got
an error message ­ blinking red light.  Since you have not had a problem, I
know it can be done.  I’ll try some other combinations.

Harry


On 4/16/07 9:11 AM, "Evan Wolarsky" <wolarsky@...> wrote:

>  
>  
>  
> 
> Harry, When you choose Velvet Fine Art in Print Setup, you should get
> a message that says you have to use the "Manual Roll" setting on the
> printer. If you feed the paper through the regular tray, it doesn't
> work properly, as you have found. You have to use the tray behind the
> regular paper holder. This is all described in the printer booklet. I
> can't fine mine, otherwise I would tell you which page.
> 
> Evan
> 
>> > I agree with your comments on the 2400 and ABW.  In the short while
> I¹ve had
>> > the 2400, I¹ve printed on EEM and HPR successfully using ABW.  But
> my effort
>> > with Epson VFA has been a total failure.  In order to access VFA in
> the
>> > print dialogue, I had to feed through the front loading tray.  The
> resulting
>> > print was a mess; there was (faint) ink outside the margins and the
>> > otherwise very nice image was badly posterized.  Any thoughts on
> what I am
>> > doing wrong?
>> > 
>> > Harry Lockwood
>> >Art
>>> > > are quite beautiful, and you can use any of the newer papers.
> While I
>>> > > have no experience with the 3800, it is probably worth
> considering as
>>> > > ink costs will ultimately be lower.
>>> > > 
>>> > > Evan
>>> > > 
> 


[Non-text portions of this message have been removed]