Digital BW, The Print

Don't 'cha just feel like "I love Lucy" on the candy conveyor 
sometimes???

I was pretty excited when I ordered a roll holder for my 1270... At 
least I only had the problem with relatively cheap Epson paper... I 
wound up pulling the plug like you did and then cut the paper and let 
it run through (I was SURE it would print some binary number code all 
over it if I let the whole thing go through).

If you can guess or measure how much to cut off, you can shoot it 
through and then trim it up and feed it like a large sheet? That's 
what I wound up doing and it was actually OK.

Good luck

Tom O'Connell


--- In DigitalBlackandWhiteThePrint@y..., "graphicsnz" <consult@c...> 
wrote:
> Testing a cut-down photo rag roll in the 1160 piezo and needed 
> to interrupt the first print. I made two mistakes: in pre-feeding 
the 
> paper, so it fed to the second "sheet" of the panorama, and not 
> centreing the image.
> 
> Now I can't get the roll out to rewind. Is there any way to 
manually 
> reverse the paper or unlock the feed rollers?
> 
> Otherwise, switching it off feeds the entire 12m roll before it 
> stops (I pulled the plug)