Digital BW, The Print

Hi Arlene, 

 

I haven't been able to think too much about this, but be sure and follow
http://www.paulroark.com/BW-Info/UT7-7600-Readme.htm

 

You are going through a gray scale step before converting to RGB and
applying the curve, I hope.  Just be sure all the original color is removed
from the file.

 

Be sure the carts are loaded correctly.  Use a purge pattern and compare the
print to the ink positions in the Readme file above.

 

Paul

www.PaulRoark.com <http://www.paulroark.com/>  

 

 

  _____  

From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of lovelipp
Sent: Sunday, September 09, 2007 12:22 PM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: [Digital BW] curves settings having no effect on tone

 

My 7600 has just come back from repair and the nozzle checks are now 
perfect. I re-installed Paul Roark's curves for EEM and HPR, but no 
matter the setting, the prints come out cold. (PS CS2). Under color 
settings I set as follows: Where am I off?
SETTINGS: Custom
RGB: Adobe RGB 1998
CMYK: U.S. Web coated swop 2
Gray: Gray Gamma 2
Spot: Dot Gain 20%

COLOR MAHANGEMNET POLICIES
RGB Off
CMYK Off
Gray: Off

CONVERSION OPTIONS 
Engine: Adobe Ace v
Intent: Relative Colormetric v

ADVANCED CONTROLS
Desaturate Monitor colors by: 20%
Blend RGB colors using gamma: 1.00

COLOR MANAGEMENT: OFF

ASSIGN PROFILE
? O Don't color manage 
? O Working profile RGB (1998)
O Profile Adobe RGB 1998 checked 


Many thanks for help,
Arlene
arlenelove3@ <mailto:arlenelove3%40aol.com> aol.com



 



[Non-text portions of this message have been removed]