Digital BW, The Print

chriskjezp wrote:
> 
> 
> 
>  > Chris, Max: I don't have this problem. What is the temperature
>  > and humidity where your printer is located?
>  >
>  > Dana
>  >
> 
> Dana,
> 
> I'm in Berkeley, CA. Not too humid, and not too hot right now.

Hmmmm, I'm not *that* far away (Cordelia - just north of
Benicia), but typically less humid here (outdoor humidity
around 35-40% right now) than Berkeley (60-65% right now).
I suspect my indoor humidity usually follows outdoor
pretty closely.

> The 3rd and 4th print didn't exhibit scratches. I'll report back
> after a few more.

It'll be interesting to see if we can find a pattern.

> One problem I'm having, though, is that this paper seems to be a dust
> magnet! Unfortunately my house is very dusty, and as soon as the
> print is through the printer it gets covered with little dust
> particles that can be difficult to get out (esp. because they're
> making contact with the print when it's still somewhat wet).
> 
> Does anyone have suggestions for how to prevent this or what to do
> about it? I suspect I'd have this issue with all glossy papers, but
> Harman is the first one I've tried.

All I've been able to do is run a room air cleaner constantly to
keep the dust down, and I put prints in a cabinet to dry for at
least 15 minutes after printing.

Good luck -
Dana