Digital BW, The Print

Why not contact Cone and get them to send you a sample?  If you like the
tone then go with the MPS.

David Whistance

  -----Original Message-----
  From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]On Behalf Of uomo_link
  Sent: 09 December 2007 21:38
  To: DigitalBlackandWhiteThePrint@yahoogroups.com
  Subject: Re: [Digital BW] Piezo MPS in R2400.


  --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "David
  Whistance" <david.whistance@...> wrote:
  >
  > Hi, I haven't used MPS but I have used the other K6/K7 inks in
  several
  > printers. As far as I know at the moment MPS works just like any
  of the
  > other K7 inksets and uses their QTR profiles. The GLOP channel,
  which will
  > allow this inkset to print onto glossy media hasn't been profiled
  by Cone
  > yet so the GLOP is not on general release, although if you want to
  profile
  > it yourself I think it is available by special request. As the ink
  > dilutions are the same as the other K7 inks I don't think you need
  to be
  > concerned about them, they work very well for matte papers, the only
  > question is really whether you like the "selenium" tone.
  >
  > David Whistance
  >
  > -----Original Message-----
  > From: DigitalBlackandWhiteThePrint@yahoogroups.com
  > [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]On Behalf Of
  uomo_link
  > Sent: 09 December 2007 18:17
  > To: DigitalBlackandWhiteThePrint@yahoogroups.com
  > Subject: [Digital BW] Piezo MPS in R2400.
  >
  >
  > Hi, I've already post this question in QTR thread, but actually
  should
  > be here the right place. Has already anyone tried the new inks
  > diluitions from J. Cone in a R2400? I'm waiting for the empty CIS
  from
  > Eifillink, Piezo MPS sounds to be perfect for my works, -90% Matte
  > papers, 10% HPRag pearl-, but if the issue is just the patience
  and
  > care to profile the papers myself, that's pretty fine. My worry is
  > about the state of diluitions for each channels, are they ready
  to be
  > sold as they are, apart from the profiles? Any suggestions?
  Inkjetmall
  > support seems to be too busy, and the local Piezography reseller
  (Milan-
  > Italy) isn't so precise about the reasons. Any help from the real
  world
  > users will be great! Thanks.
  > al
  >
  > Thanks David, perhaps it's much wiser for me start my learning
  curve into the piezography tones with the Neutral k7, as I've not had
  in my hands a selnium toned print yet, to realize the coolness of
  these Piezo inks. It'd be worthwhile to fill the new CIS with MPS,
  for the increased DMax in the few HPRag pearl I need to do, but I
  suppose that the richer gradations I'd reach with Nk7 than with the
  actual E.k3, can give me enough to work with.
  >
  >
  >
  >
  > [Non-text portions of this message have been removed]
  >



  


[Non-text portions of this message have been removed]