Digital BW, The Print

Sorry for the delay.
I will test in the morning.
Mike J.

-----Original Message-----
From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]On Behalf Of pr_roark
Sent: Wednesday, February 06, 2008 10:09 AM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: [Digital BW] Re: Problem with Paul Roark iccs

Roy Harrington wrote:
...

> I downloaded the latest R260-ICCs zip file.  There are a lot of
> ICC files and most of them are OK.  But 10 of them are corrupted.

>  Mike looked into some and suggested that some of the 00's
> where changed into spaces (20s).
> This does appear to be the case.   This is the list of bad ones:
>
> 260-Epson-PremierArt-Scrapbook205.icc
> 260-EpsonPremiumLuster.icc
> 260-EpsonVelvetFineArt.icc
> 260-Hahnemuhle-PhotoRag.icc
> 260-HawkMtnPeregrine.icc
> 260-Innova-SmoothHiWhite.icc
> 260-Kirkland-Glossy.icc
> 260-PremierArt-Smooth-HP-270.icc
> 260-PremierArtSmooth-HP-205.icc
> 260-UPPM-EEM.icc
>
> There are several with very similar name (with or without dashes).
> Paul, could you check some of these are see if they are OK on your
> master machine?

Yep, they're no good.

I can't tell (don't remember) what happened, but usually there is a
newer ICC for the paper that works. Since I see that one in my Print
Preview, the bad ones went un-noticed.  I'm guessing that I caught
the problem on 9/30 and re-did the ICCs that afternoon, but because I
used a slightly different name for at least some, they did not over-
write the bad ones, which ended up in the folder along with the good
ones.

Can you tell what would have caused the problem?

Comparing the good with the bad, it appears the same linearization
data was used.  So, that can be lifted out of the few bad ones where
there is no re-made working version to make working versions.  I'll
remove the bad ones from the Zip.

Mike, does your system see the working versions -- for example,
the "260-HahnemuhlePhotoRag" as opposed to the "260-Hahnemuhle-
PhotoRag" version?

Paul
www.PaulRoark.com