Digital BW, The Print

Thanks for your post, Rick, and I'll be watching for some answers. I'm
in exactly the same position you are. My 1280 was used very little,
it's very clean inside... but I'm sure the nozzles are clogged. I
didn't try cleaning carts but I did the Windex-soaked paper towel
thing, laying the towel in the path of the cart then moving the cart
back and forth then letting it sit overnight. But no luck.

Let's see how this thread develops!

Paul

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "rickkretz"
<rikster44@...> wrote:
>
> I have recently purchased a 1280 from a third party.I was told that
> it was used very little and that it sat for a long time.So I purchased 
> the cleaning solutions from MIS.I have been running the solution in
> new empty carts through the printer cleaning cycle. I still can't
get the 
> printer to print any part of the test pattern. This seems out of the
> ordinary.Can the nozzles be plugged so bad as not to let any ink through
> to print any part of the pattern or do I have another problem with the
> printer The printer does look to not have been used much there is not
> much ink built up in any of the foam pads. Thanks if anyone can advise.
>