Digital BW, The Print

The CIS manufacturer will doubtless give you instructions on this subject
but with my CIS (from MIS Associates) they specify to have the bottles at
the same level as the printer. Having the bottles too high might cause an
excess of ink in the carts and too low might cause ink starvation.  But be
guided by the instructions you receive with your CIS.

 

Good luck!

 

Tom 

 

From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of
JensGerbitz
Sent: Friday, August 08, 2008 5:47 PM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: [Digital BW] Question about CIS bottle positioning

 

Hi everyone,

I'm interested in picking up a new Epson 1400 & a CIS system. However 
space is a problem in my cramped studio / bedroom. I have set up a 
shelving system that takes up most of the space in my closet (don't 
ask) and which already contains a 3800, my laptop, and sundry other 
hardware. One more shelf is available for the 1400. At issue is 
whether I can place the CIS bottle bundle above or below the shelf 
upon which the printer will rest since there won't be room to place it 
beside the printer, the usual approach (probably for good reason).

I'd appreciate feedback from those that have run into similar CIS 
space issues and what the best solution would be, if there is one at 
all.

Cheers,
Jens

 



[Non-text portions of this message have been removed]