Digital BW, The Print

Thanks for the suggestions, guys. I finally had success with a fairly
non-technical approach. I removed the carts, turned the printer over,
gave it a good shake and replaced the carts. That fixed it. There must
have been a small particle of something that made the machine think
there was a paper jam.
Les

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Brubaker family
<brubaker_family@...> wrote:
>
> With the power outages, your 2400 may be covered under your
homeowners insurance even if it is out of warranty.  It can't hurt to
check with your agent.
> 
> Mike Brubaker
> 
> 
> 
> --- On Mon, 11/17/08, lestihor <lestihor@...> wrote:
> 
> > From: lestihor <lestihor@...>
> > Subject: [Digital BW] Re: Epson R2400 flashing
> > To: DigitalBlackandWhiteThePrint@yahoogroups.com
> > Date: Monday, November 17, 2008, 2:22 PM
> > No, no paper jam. Just turned everything on this morning and
> > printer
> > had flashing error lights. We did have a couple of power
> > outages
> > yesterday. I wonder if there could have been surges with
> > the outages
> > that could have caused the problem. I just noticed that the
> > printer is
> > the only piece of equipment not on a surge protector.
> > Les
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com,
> > "Joseph Cettina"
> > <joec@> wrote:
> > >
> > > Les
> > > you have a fatal error The printer found something
> > wrong during it 
> > > post Which could be a number of things Like ink
> > system, paper feed, 
> > > motors, Sensors.
> > > What happened?
> > > Did you get a paper jam and you pulled out the Paper?
> > > Joe
> > > 
> > > 
> > > 
> > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com,
> > "lestihor" 
> > > <lestihor@> wrote:
> > > >
> > > > My R2400 stopped printing. I went to Epson
> > troubleshooting without
> > > > success. Power light is off, ink and paper lights
> > flash rapidly in
> > > > sync. I can't find any paper blockage and the
> > ink cart carrier seems
> > > > to move freely. I tried turning the printer and
> > computer off and
> > > > disconnecting power to both for a few minutes,
> > but did not solve the
> > > > problem. Anybody have any ideas?
> > > > 
> > > > Les
> > > >
> > >
>