Digital BW, The Print

The auto check patterns are much better for checking that the nozzles are
really clear and you can visually also see all the K7 ink patterns clearly
without a loupe..

You might find that the 9800 still runs an auto check ok with K7.
My 1900 does. But I haven't tried this on large format.

Also if the 9800 prints a single strip of patches for the auto nozzle check
(like the 4800) you can let it print the strip and then if it can't read
them properly you can just press reset after its printed, but before it auto
checks and then check by eye.

Mike





2009/7/11 Patrick Carr <patcarr@...>

>
>
> Just installed (for the first time) Jon Cone's Special Edition K7s in my
> 7800. Did a couple of power cleanings and printed a nozzle check. First
> thing I noticed was how light the 4th pattern from the left is--so light
> I can barely see it, but I can see that the nozzles are printing if I
> hold it just right and use a loupe.
>
> So, is the ink really that light in that position, or should I work
> towards a more visible pattern?
>
> Thanks!
>
> Patrick Carr
> Carr Imaging
> 
>


[Non-text portions of this message have been removed]