Digital BW, The Print

HELLO ALL,

I'm going to take one more stab at this issue.  I posted a week ago and received some information, most of which I was already aware of. Obviously I am referring to the length restriction when printing on the 7600 from PS. It has always been, and at least in my case still is, 90.5". Interestingly, one of the replies suggested that with the introduction CS3 the length restriction had been "fixed". The gentleman who had forwarded that information also said that he is using the 3.09 version of the Epson driver and OS X 10.4(Tiger). On the Epson site that driver is stated to be used with Leopard only. I did however install it on one of my bootable drives with Tiger, but of course it was NOT at all compatible. I also have a drive with Leopard installed and the 3.09 diver as well, but the length restriction is still in effect. I doubt that any of you good folks will have any new information to pass along concerning this problem, but thought I would throw this out one more time. 

To be a little more precise, I am running two 7600 printers. Printing from PS on a Mac G5 Power PC and OS X 10.4.11. Any new information would be greatly appreciated.

Thanks,
Gary