Digital BW, The Print

Paul, thanks for the quick response. I will let you know how the ink works out after a few days.

One more question: Is there significance difference between MIS 1400 ink and Jon Cone's Piezography K6 and/or the output of each.
Thanks
Craig




________________________________
From: pr_roark <roark.paul@...>
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Sent: Mon, February 15, 2010 11:43:41 AM
Subject: [Digital BW] Re: Bought the Epson 1400

  
R Craig Blackman <blac1588@.. .> wrote:
>
> Paul, et al;
> My 1400 is set up and I have a couple of questions.
> 1. The table which supports the print is not completely still; ie, when printing, the printer has a slight rock to it. 
> Is it critical that the printer not move or the support not move?

Movement of the table should be no problem.

> 
> 2. As suggested, I loaded the orig. color cartridges emsuring that the printer did and would work properly. I want to replace the ink with the MIS 1400 and get on with my B&W print life. 
> IS it essential that I wash out the color inks before installing?

It is recommnended that the OEM Claria inks be rinsed out, but it may not make any difference. MIS says the Eboni-6 base is not compatible with the Epson UltraChrome inks, but I'm not sure about Claria. I have heard of no particular problem with the other MIS inks or the C6 base. So, I have no 100% answer for you here.

Paul
www.PaulRoark. com 




[Non-text portions of this message have been removed]