Digital BW, The Print

Chris thanks for the URL, but unfortunately it does not cover the 1160.

Is my only option to take it in for service? Since I am using a CIS
would I have to put the originally ink cartridges back in?

Thanks

Steve

Chris Hargens wrote:

> 
> This link will give you some information --
> http://www.mwords.co.uk/pages/printers/printersHowDoI.htm
> Toward the bottom of the page there will be section titled
> "How do I Reset my printer to Clear Error Light Conditions?"
> BTW, sometimes if my printer has been idle for a bit -- in fact more
> frequently than I like -- my printer stops in midprint and all of the
> lights go off. I've found that lubing the rail that the printhead
> moves along seems to solve the problem.
> 
> Chris
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Steve Schaefer"
> <stevenr@m...> wrote:
> > Message-ID: <bbadtt+etgk@e...>
> > User-Agent: eGroups-EW/0.82
> > MIME-Version: 1.0
> > Content-Type: text/plain; charset=ISO-8859-1
> > Content-Length: 178
> > X-Mailer: Yahoo Groups Message Poster
> > > > X-Yahoo-GPoster: 8iix_GeQeXwKVb=i
> >
> >
> > I just got back from a trip and was knocking out some work prints,
> and
> > all the light started to blinking on my 1160.
> >
> > Any help or advice would be appreciated.
> >
> > Thanks
> >
> > Steve
> 
>                    Yahoo! Groups Sponsor
> 
> 
> 
> Please visit the Group Homepage to check the Files, Bookmarks, Polls
> and other resources as they are often being updated. The page is at:
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish
> to unsubscribe, please edit your Membership preferences by visiting
> this same page.
> 
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to
> keep them short.
> - As the topic of a thread changes remember to change the subject
> header.
> - Good manners are required at all time. No personal attacks or flames
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the
> various resources on the homepage.
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

I can only speak for myself, but what I'd do is check to verify that 
the inkpads do indeed need to be replaced. (BTW, is your printer also 
refusing to turn off when you push the power button?) If they don't 
need to be replaced then I'd search the web for any info about 
resetting the counter for the 1160. If they do need to be replaced, 
then removing the CFS is probably necessary, unless you can find a 
service person within easy driving distance. 

Chris Hargens

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steven Schaefer 
<stevenr@m...> wrote:
> Chris thanks for the URL, but unfortunately it does not cover the 
1160.
> 
> Is my only option to take it in for service? Since I am using a CIS
> would I have to put the originally ink cartridges back in?
> 
> Thanks
> 
> Steve
> 
> Chris Hargens wrote:
> > 
> > This link will give you some information --
> > http://www.mwords.co.uk/pages/printers/printersHowDoI.htm
> > Toward the bottom of the page there will be section titled
> > "How do I Reset my printer to Clear Error Light Conditions?"
> > BTW, sometimes if my printer has been idle for a bit -- in fact 
more
> > frequently than I like -- my printer stops in midprint and all of 
the
> > lights go off. I've found that lubing the rail that the printhead
> > moves along seems to solve the problem.
> > 
> > Chris
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Steve 
Schaefer"
> > <stevenr@m...> wrote:
> > > Message-ID: <bbadtt+etgk@e...>
> > > User-Agent: eGroups-EW/0.82
> > > MIME-Version: 1.0
> > > Content-Type: text/plain; charset=ISO-8859-1
> > > Content-Length: 178
> > > X-Mailer: Yahoo Groups Message Poster
> > > > > > X-Yahoo-GPoster: 8iix_GeQeXwKVb=i
> > >
> > >
> > > I just got back from a trip and was knocking out some work 
prints,
> > and
> > > all the light started to blinking on my 1160.
> > >
> > > Any help or advice would be appreciated.
> > >
> > > Thanks
> > >
> > > Steve
> > 
> >                    Yahoo! Groups Sponsor
> > 
> > 
> > 
> > Please visit the Group Homepage to check the Files, Bookmarks, 
Polls
> > and other resources as they are often being updated. The page is 
at:
> > 
> > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> > 
> > If you wish to receive no emails or just a daily digest, or you 
wish
> > to unsubscribe, please edit your Membership preferences by 
visiting
> > this same page.
> > 
> > Please follow these basic guidelines:
> > - Include your full name with your message.
> > - Include the address of your website, if you have one.
> > - As threads develop, trim off excess portions of earlier 
messages to
> > keep them short.
> > - As the topic of a thread changes remember to change the subject
> > header.
> > - Good manners are required at all time. No personal attacks or 
flames
> > - Complete your Yahoo profile.
> > - Before posting a question, search the message archives and the
> > various resources on the homepage.
> > 
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.

Chris, it looks massy back in there. I guess the inkpads need replaced,
and yes the printer is also refusing to turn off. What does that mean?

Thanks for the help

Steve

Chris Hargens wrote:

> 
> I can only speak for myself, but what I'd do is check to verify that
> the inkpads do indeed need to be replaced. (BTW, is your printer also
> refusing to turn off when you push the power button?) If they don't
> need to be replaced then I'd search the web for any info about
> resetting the counter for the 1160. If they do need to be replaced,
> then removing the CFS is probably necessary, unless you can find a
> service person within easy driving distance.
> 
> Chris Hargens
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steven Schaefer
> <stevenr@m...> wrote:
> > Chris thanks for the URL, but unfortunately it does not cover the
> 1160.
> >
> > Is my only option to take it in for service? Since I am using a CIS
> > would I have to put the originally ink cartridges back in?
> >
> > Thanks
> >
> > Steve
> >
> > Chris Hargens wrote:
> > >
> > > This link will give you some information --
> > > http://www.mwords.co.uk/pages/printers/printersHowDoI.htm
> > > Toward the bottom of the page there will be section titled
> > > "How do I Reset my printer to Clear Error Light Conditions?"
> > > BTW, sometimes if my printer has been idle for a bit -- in fact
> more
> > > frequently than I like -- my printer stops in midprint and all of
> the
> > > lights go off. I've found that lubing the rail that the printhead
> > > moves along seems to solve the problem.
> > >
> > > Chris
> > >
> > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Steve
> Schaefer"
> > > <stevenr@m...> wrote:
> > > > Message-ID: <bbadtt+etgk@e...>
> > > > User-Agent: eGroups-EW/0.82
> > > > MIME-Version: 1.0
> > > > Content-Type: text/plain; charset=ISO-8859-1
> > > > Content-Length: 178
> > > > X-Mailer: Yahoo Groups Message Poster
> > > > > > > > X-Yahoo-GPoster: 8iix_GeQeXwKVb=i
> > > >
> > > >
> > > > I just got back from a trip and was knocking out some work
> prints,
> > > and
> > > > all the light started to blinking on my 1160.
> > > >
> > > > Any help or advice would be appreciated.
> > > >
> > > > Thanks
> > > >
> > > > Steve
> > >
> > >                    Yahoo! Groups Sponsor
> > >
> > >
> > >
> > > Please visit the Group Homepage to check the Files, Bookmarks,
> Polls
> > > and other resources as they are often being updated. The page is
> at:
> > >
> > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> > >
> > > If you wish to receive no emails or just a daily digest, or you
> wish
> > > to unsubscribe, please edit your Membership preferences by
> visiting
> > > this same page.
> > >
> > > Please follow these basic guidelines:
> > > - Include your full name with your message.
> > > - Include the address of your website, if you have one.
> > > - As threads develop, trim off excess portions of earlier
> messages to
> > > keep them short.
> > > - As the topic of a thread changes remember to change the subject
> > > header.
> > > - Good manners are required at all time. No personal attacks or
> flames
> > > - Complete your Yahoo profile.
> > > - Before posting a question, search the message archives and the
> > > various resources on the homepage.
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
> 
>                    Yahoo! Groups Sponsor
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, Bookmarks, Polls
> and other resources as they are often being updated. The page is at:
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish
> to unsubscribe, please edit your Membership preferences by visiting
> this same page.
> 
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to
> keep them short.
> - As the topic of a thread changes remember to change the subject
> header.
> - Good manners are required at all time. No personal attacks or flames
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the
> various resources on the homepage.
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

From what I understand, if all lights are blinking and the printer 
refuses to turn off, then that means that it is telling you -- 
rightly or wrongly -- that the inkpads need to be replaced. 

Chris Hargens
--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steven Schaefer 
<stevenr@m...> wrote:
> Chris, it looks massy back in there. I guess the inkpads need 
replaced,
> and yes the printer is also refusing to turn off. What does that 
mean?
> 
> Thanks for the help
> 
> Steve
> 
> Chris Hargens wrote:
> > 
> > I can only speak for myself, but what I'd do is check to verify 
that
> > the inkpads do indeed need to be replaced. (BTW, is your printer 
also
> > refusing to turn off when you push the power button?) If they 
don't
> > need to be replaced then I'd search the web for any info about
> > resetting the counter for the 1160. If they do need to be 
replaced,
> > then removing the CFS is probably necessary, unless you can find a
> > service person within easy driving distance.
> > 
> > Chris Hargens
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steven 
Schaefer
> > <stevenr@m...> wrote:
> > > Chris thanks for the URL, but unfortunately it does not cover 
the
> > 1160.
> > >
> > > Is my only option to take it in for service? Since I am using a 
CIS
> > > would I have to put the originally ink cartridges back in?
> > >
> > > Thanks
> > >
> > > Steve
> > >
> > > Chris Hargens wrote:
> > > >
> > > > This link will give you some information --
> > > > http://www.mwords.co.uk/pages/printers/printersHowDoI.htm
> > > > Toward the bottom of the page there will be section titled
> > > > "How do I Reset my printer to Clear Error Light Conditions?"
> > > > BTW, sometimes if my printer has been idle for a bit -- in 
fact
> > more
> > > > frequently than I like -- my printer stops in midprint and 
all of
> > the
> > > > lights go off. I've found that lubing the rail that the 
printhead
> > > > moves along seems to solve the problem.
> > > >
> > > > Chris
> > > >
> > > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Steve
> > Schaefer"
> > > > <stevenr@m...> wrote:
> > > > > Message-ID: <bbadtt+etgk@e...>
> > > > > User-Agent: eGroups-EW/0.82
> > > > > MIME-Version: 1.0
> > > > > Content-Type: text/plain; charset=ISO-8859-1
> > > > > Content-Length: 178
> > > > > X-Mailer: Yahoo Groups Message Poster
> > > > > > > > > > X-Yahoo-GPoster: 8iix_GeQeXwKVb=i
> > > > >
> > > > >
> > > > > I just got back from a trip and was knocking out some work
> > prints,
> > > > and
> > > > > all the light started to blinking on my 1160.
> > > > >
> > > > > Any help or advice would be appreciated.
> > > > >
> > > > > Thanks
> > > > >
> > > > > Steve
> > > >
> > > >                    Yahoo! Groups Sponsor
> > > >
> > > >
> > > >
> > > > Please visit the Group Homepage to check the Files, Bookmarks,
> > Polls
> > > > and other resources as they are often being updated. The page 
is
> > at:
> > > >
> > > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> > > >
> > > > If you wish to receive no emails or just a daily digest, or 
you
> > wish
> > > > to unsubscribe, please edit your Membership preferences by
> > visiting
> > > > this same page.
> > > >
> > > > Please follow these basic guidelines:
> > > > - Include your full name with your message.
> > > > - Include the address of your website, if you have one.
> > > > - As threads develop, trim off excess portions of earlier
> > messages to
> > > > keep them short.
> > > > - As the topic of a thread changes remember to change the 
subject
> > > > header.
> > > > - Good manners are required at all time. No personal attacks 
or
> > flames
> > > > - Complete your Yahoo profile.
> > > > - Before posting a question, search the message archives and 
the
> > > > various resources on the homepage.
> > > >
> > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > Service.
> > 
> >                    Yahoo! Groups Sponsor
> > 
> > 
> > 
> > 
> > Please visit the Group Homepage to check the Files, Bookmarks, 
Polls
> > and other resources as they are often being updated. The page is 
at:
> > 
> > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> > 
> > If you wish to receive no emails or just a daily digest, or you 
wish
> > to unsubscribe, please edit your Membership preferences by 
visiting
> > this same page.
> > 
> > Please follow these basic guidelines:
> > - Include your full name with your message.
> > - Include the address of your website, if you have one.
> > - As threads develop, trim off excess portions of earlier 
messages to
> > keep them short.
> > - As the topic of a thread changes remember to change the subject
> > header.
> > - Good manners are required at all time. No personal attacks or 
flames
> > - Complete your Yahoo profile.
> > - Before posting a question, search the message archives and the
> > various resources on the homepage.
> > 
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.

You don't have to remove the CFS unless you have to ship the printer. I had
mine serviced with all the bottles etc. intact. The guy wanted it that way.

bgs
----- Original Message -----
From: "Steven Schaefer" <stevenr@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Tuesday, June 03, 2003 1:46 PM
Subject: Re: [Digital BW] Re: Help!!! All the lights are blinking on a 1160.


> Chris, it looks massy back in there. I guess the inkpads need replaced,
> and yes the printer is also refusing to turn off. What does that mean?
>
> Thanks for the help
>
> Steve
>
> Chris Hargens wrote:
> >
> > I can only speak for myself, but what I'd do is check to verify that
> > the inkpads do indeed need to be replaced. (BTW, is your printer also
> > refusing to turn off when you push the power button?) If they don't
> > need to be replaced then I'd search the web for any info about
> > resetting the counter for the 1160. If they do need to be replaced,
> > then removing the CFS is probably necessary, unless you can find a
> > service person within easy driving distance.
> >
> > Chris Hargens
> >
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steven Schaefer
> > <stevenr@m...> wrote:
> > > Chris thanks for the URL, but unfortunately it does not cover the
> > 1160.
> > >
> > > Is my only option to take it in for service? Since I am using a CIS
> > > would I have to put the originally ink cartridges back in?
> > >
> > > Thanks
> > >
> > > Steve
> > >
> > > Chris Hargens wrote:
> > > >
> > > > This link will give you some information --
> > > > http://www.mwords.co.uk/pages/printers/printersHowDoI.htm
> > > > Toward the bottom of the page there will be section titled
> > > > "How do I Reset my printer to Clear Error Light Conditions?"
> > > > BTW, sometimes if my printer has been idle for a bit -- in fact
> > more
> > > > frequently than I like -- my printer stops in midprint and all of
> > the
> > > > lights go off. I've found that lubing the rail that the printhead
> > > > moves along seems to solve the problem.
> > > >
> > > > Chris
> > > >
> > > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Steve
> > Schaefer"
> > > > <stevenr@m...> wrote:
> > > > > Message-ID: <bbadtt+etgk@e...>
> > > > > User-Agent: eGroups-EW/0.82
> > > > > MIME-Version: 1.0
> > > > > Content-Type: text/plain; charset=ISO-8859-1
> > > > > Content-Length: 178
> > > > > X-Mailer: Yahoo Groups Message Poster
> > > > > > > > > > X-Yahoo-GPoster: 8iix_GeQeXwKVb=i
> > > > >
> > > > >
> > > > > I just got back from a trip and was knocking out some work
> > prints,
> > > > and
> > > > > all the light started to blinking on my 1160.
> > > > >
> > > > > Any help or advice would be appreciated.
> > > > >
> > > > > Thanks
> > > > >
> > > > > Steve
> > > >
> > > >                    Yahoo! Groups Sponsor
> > > >
> > > >
> > > >
> > > > Please visit the Group Homepage to check the Files, Bookmarks,
> > Polls
> > > > and other resources as they are often being updated. The page is
> > at:
> > > >
> > > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> > > >
> > > > If you wish to receive no emails or just a daily digest, or you
> > wish
> > > > to unsubscribe, please edit your Membership preferences by
> > visiting
> > > > this same page.
> > > >
> > > > Please follow these basic guidelines:
> > > > - Include your full name with your message.
> > > > - Include the address of your website, if you have one.
> > > > - As threads develop, trim off excess portions of earlier
> > messages to
> > > > keep them short.
> > > > - As the topic of a thread changes remember to change the subject
> > > > header.
> > > > - Good manners are required at all time. No personal attacks or
> > flames
> > > > - Complete your Yahoo profile.
> > > > - Before posting a question, search the message archives and the
> > > > various resources on the homepage.
> > > >
> > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > Service.
> >
> >                    Yahoo! Groups Sponsor
> >
> >
> >
> >
> > Please visit the Group Homepage to check the Files, Bookmarks, Polls
> > and other resources as they are often being updated. The page is at:
> >
> > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> >
> > If you wish to receive no emails or just a daily digest, or you wish
> > to unsubscribe, please edit your Membership preferences by visiting
> > this same page.
> >
> > Please follow these basic guidelines:
> > - Include your full name with your message.
> > - Include the address of your website, if you have one.
> > - As threads develop, trim off excess portions of earlier messages to
> > keep them short.
> > - As the topic of a thread changes remember to change the subject
> > header.
> > - Good manners are required at all time. No personal attacks or flames
> > - Complete your Yahoo profile.
> > - Before posting a question, search the message archives and the
> > various resources on the homepage.
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or flames
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.

>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steven 
Schaefer  <stevenr@m...> wrote:
> > Chris thanks for the URL, but unfortunately it does not cover the 
> 1160.
> > 
> > Is my only option to take it in for service? Since I am using a 
CIS
> > would I have to put the originally ink cartridges back in?
> > 

Steve:

I don't remember which proceedure (#1 or #2) in the mswords web site 
but one did the trick on my 1160 with a CIS.  You might want to try 
these before spending money on Epson service.

http://www.mwords.co.uk/pages/printers/printersHowDoI.htm

Jeff Randall

After 2 years and over 12 ounces of Gen4 my 1160 lights started flashing and
I was easily able to reset using one of the iterations noted, I forget
which.  I ordered two sets of pads, took off the cover to where I could see
the pads and buttoned it back up as they had a long way to go.  Fine since.
Anybody want my second set of pads?

Phil Morse
www.DigitaLoft.com

> I don't remember which proceedure (#1 or #2) in the mswords web site
> but one did the trick on my 1160 with a CIS.  You might want to try
> these before spending money on Epson service.
>
> http://www.mwords.co.uk/pages/printers/printersHowDoI.htm
>
> Jeff Randall

I will take the second set of pads if I can get the light to quite flashing.

Steve

Phil Morse wrote:

> 
> After 2 years and over 12 ounces of Gen4 my 1160 lights started
> flashing and
> I was easily able to reset using one of the iterations noted, I forget
> which.  I ordered two sets of pads, took off the cover to where I
> could see
> the pads and buttoned it back up as they had a long way to go.  Fine
> since.
> Anybody want my second set of pads?
> 
> Phil Morse
> www.DigitaLoft.com
> 
> > I don't remember which proceedure (#1 or #2) in the mswords web site
> > but one did the trick on my 1160 with a CIS.  You might want to try
> > these before spending money on Epson service.
> >
> > http://www.mwords.co.uk/pages/printers/printersHowDoI.htm
> >
> > Jeff Randall
> 
>                    Yahoo! Groups Sponsor
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, Bookmarks, Polls
> and other resources as they are often being updated. The page is at:
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish
> to unsubscribe, please edit your Membership preferences by visiting
> this same page.
> 
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to
> keep them short.
> - As the topic of a thread changes remember to change the subject
> header.
> - Good manners are required at all time. No personal attacks or flames
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the
> various resources on the homepage.
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

OK, I just got it to work, but it was a little different then procedure
1 for the 1270 type printer.

Here is what I did for the 1160:


Turn off your printer, ensuring that the print head is at it's home location
and locked in place as normal; 

2. Power off the printer at the wall or by removing the power cable, for at
least 20 seconds; 

3. When you restore power to the printer at the wall socket or by
reinserting the cable, if the lights come back on straight away, the
printer's power switch was 'on' - switch it off and return to step 1;
 
4. Hold down the paper-feed button and the button with the ink-drops
next to it, and then turn on the printer, still holding the buttons
down; 

5. When the paper-out LED flashes, release the buttons; 

6. Press and hold the button with the ink-drops until lights flash -
this will
take a few seconds (i.e. then release the button); 

7. The printer will now attempt to reset, including resetting the EEPROM
memory and running a short (about 10 seconds) cleaning cycle. 

Thanks for all your help.

Steve



Jeff Randall wrote:

> 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steven
> Schaefer  <stevenr@m...> wrote:
> > > Chris thanks for the URL, but unfortunately it does not cover the
> > 1160.
> > >
> > > Is my only option to take it in for service? Since I am using a
> CIS
> > > would I have to put the originally ink cartridges back in?
> > >
> 
> Steve:
> 
> I don't remember which proceedure (#1 or #2) in the mswords web site
> but one did the trick on my 1160 with a CIS.  You might want to try
> these before spending money on Epson service.
> 
> http://www.mwords.co.uk/pages/printers/printersHowDoI.htm
> 
> Jeff Randall
> 
>                    Yahoo! Groups Sponsor
>                        ADVERTISEMENT
>                        [Click Here!]
> 
> 
> Please visit the Group Homepage to check the Files, Bookmarks, Polls
> and other resources as they are often being updated. The page is at:
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish
> to unsubscribe, please edit your Membership preferences by visiting
> this same page.
> 
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to
> keep them short.
> - As the topic of a thread changes remember to change the subject
> header.
> - Good manners are required at all time. No personal attacks or flames
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the
> various resources on the homepage.
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Steve,
Contact me off list.  Good luck with the lights, keep trying, it works.
Phil Morse
www.DigitaLoft.com

> I will take the second set of pads if I can get the light to quite
flashing.
>
> Steve