Digital BW, The Print

Hi,
First, I am having a problem...
I have a Lexar SD Memory card reader, and a Lexar Card, and I plug 
them both into my USB port. When I go to removeable drive F, it says 
please insert disk. What is wrong???

All my printers and everything work (they are by USB too). And this 
reader/card both worked last week, now they dont.

I know it isnt either the card or reader, because I took the card to 
walmart to get prints made since this didnt work, and it read it 
fine. So I tried again, and it still cant. And the reader is about a 
week old, and worked a few days ago.

What is wrong?

Email me at zacdl@... thanks.

Zac

Hi Zac,
Seems like the reader isn't working. Even though it worked a few days ago it may have died.

Jake



Fine Art Photography
www.jakehellbachphoto.com

  -----Original Message-----
  From: Zac Lohrenz [mailto:zacdl@...]
  Sent: Wednesday, October 27, 2004 4:04 PM
  To: DigitalBlackandWhiteThePrint@yahoogroups.com
  Subject: [Digital BW] Problem



  Hi,
  First, I am having a problem...
  I have a Lexar SD Memory card reader, and a Lexar Card, and I plug 
  them both into my USB port. When I go to removeable drive F, it says 
  please insert disk. What is wrong???

  All my printers and everything work (they are by USB too). And this 
  reader/card both worked last week, now they dont.

  I know it isnt either the card or reader, because I took the card to 
  walmart to get prints made since this didnt work, and it read it 
  fine. So I tried again, and it still cant. And the reader is about a 
  week old, and worked a few days ago.

  What is wrong?

  Email me at zacdl@... thanks.

  Zac




[Non-text portions of this message have been removed]

Zac

I've had a similar problem.  Solved by unplugging the USB and then 
replugging (with the card in the reader). HTH
Paul

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Zac Lohrenz" 
<zacdl@s...> wrote:
> 
> Hi,
> First, I am having a problem...
> I have a Lexar SD Memory card reader, and a Lexar Card, and I plug 
> them both into my USB port. When I go to removeable drive F, it 
says 
> please insert disk. What is wrong???
> 
> All my printers and everything work (they are by USB too). And 
this 
> reader/card both worked last week, now they dont.
> 
> I know it isnt either the card or reader, because I took the card 
to 
> walmart to get prints made since this didnt work, and it read it 
> fine. So I tried again, and it still cant. And the reader is about 
a 

> week old, and worked a few days ago.
> 
> What is wrong?
> 
> Email me at zacdl@s... thanks.
> 
> Zac

Tried that too.

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "bwinkjet" 
<bwinkjet@y...> wrote:
> 
> Zac
> 
> I've had a similar problem.  Solved by unplugging the USB and then 
> replugging (with the card in the reader). HTH
> Paul
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Zac Lohrenz" 
> <zacdl@s...> wrote:
> > 
> > Hi,
> > First, I am having a problem...
> > I have a Lexar SD Memory card reader, and a Lexar Card, and I 
plug 
> > them both into my USB port. When I go to removeable drive F, it 
> says 
> > please insert disk. What is wrong???
> > 
> > All my printers and everything work (they are by USB too). And 
> this 
> > reader/card both worked last week, now they dont.
> > 
> > I know it isnt either the card or reader, because I took the 
card 
> to 
> > walmart to get prints made since this didnt work, and it read it 
> > fine. So I tried again, and it still cant. And the reader is 
about 

> a 
> > week old, and worked a few days ago.
> > 
> > What is wrong?
> > 
> > Email me at zacdl@s... thanks.
> > 
> > Zac

I am trying to make new QTR profiles for the 4000, starting from the inkload
calibration.  But when I try to print in QTR calibration mode, the printer
just prints in color.

Can this be done on the 4000? How were the profiles that come with v2.1
done?


Thanks,

Bill Morse
Digital Eye Editions
343 Medford St., Studio 2A
Somerville, MA 02145
(617) 429-3298



[Non-text portions of this message have been removed]

I haven't tried QTR yet on a printer with color inks, but I'll make a 
stab at this anyway.

You should see all the color inks represented in the calibration/ink 
limit test prints because you will use some or, if you like, all the 
inks in your curves to get the color of b&w that you want. I suppose 
you will turn off the yellow ink in your qtr curves to avoid the 
metamerism of  the yellow, but you will likely want a little bit of 
cyan and magenta to go along with the black and light black inks.

The more I think about this, making curves with the color inks involved 
may take a bit of trial and error to get the color right. I'm finding 
this hard to articulate in writing so I'll stop now before I confuse 
things further.

-bruce


On Thursday, Oct 28, 2004, at 16:09 US/Pacific, 
DigitalBlackandWhiteThePrint@yahoogroups.com wrote:

> Message: 24
>    Date: Thu, 28 Oct 2004 17:51:14 -0400
>    From: Bill Morse <whm.lists@...>
> Subject: 	
>
> I am trying to make new QTR profiles for the 4000, starting from the 
> inkload
> calibration.  But when I try to print in QTR calibration mode, the 
> printer
> just prints in color.
>
> Can this be done on the 4000? How were the profiles that come with v2.1
> done?
>
>
> Thanks,
>
> Bill Morse
> Digital Eye Editions
> 343 Medford St., Studio 2A
> Somerville, MA 02145
> (617) 429-3298
>
>
>
> [Non-text portions of this message have been removed]