Digital BW, The Print

I've used Archival Matte with great results.


danny

Can i use epson heaveyweight matte on 2200 printer and if so what 
settings thanks

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "danny"
<dannyt@f...> wrote:
> I've used Archival Matte with great results.
> 
> 
> danny
> 
> Can i use epson heaveyweight matte on 2200 printer and if so what 
> settings thanks

But the answer to the question is "yes"; and also that the
profile/settings
for Enhanced Matte will work well when using Heavyweight Matte paper.
IMHO, Heavyweight Matte prints
essentially the same as Enhanced Matte (which AFAIK is the very same
paper as the old Archival Matte).

Phil

Yes but you have to manually feed the paper a sheet at a time through the
back. The instruction manual tells you how to do this.

----- Original Message ----- 
From: "geminipucky" <geminipucky@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Monday, December 06, 2004 1:25 AM
Subject: [Digital BW] Can i use epson heaveyweight matte on 2200 printer





Can i use epson heaveyweight matte on 2200 printer and if so what
settings thanks









Please visit the Group Homepage to check the Files, and other resources as
they are often being updated.

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- Good manners are required at all time. No personal attacks or flames.
Hostile, aggressive or argumentative users may be removed from the
membership without notice.
- Keep your posts and threads related to the group topic of digital B&W
printing. Users who persistently make off-topic posts may be removed from
the membership.
- By posting on this forum you agree to abide by the group rules and
guidelines, and to abide by the actions and decisions of the group Owner and
Moderators. See "Group Topic, Rules and Guidelines" in the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/

BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY
DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY
TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR
ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY
THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER
MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.

Yahoo! Groups Links

I don't have a 2200 but know that HWM is actually lighter than EEM. It
should feed normally. 
I also find it prints very close to EEM. 
Bob Michaels

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "B. Campbell"
<bellis60@v...> wrote:
> Yes but you have to manually feed the paper a sheet at a time
through the
> back. The instruction manual tells you how to do this.
> 
> ----- Original Message ----- 
> From: "geminipucky" <geminipucky@y...>
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Sent: Monday, December 06, 2004 1:25 AM
> Subject: [Digital BW] Can i use epson heaveyweight matte on 2200 printer
> 
> 
> 
> 
> 
> Can i use epson heaveyweight matte on 2200 printer and if so what
> settings thanks
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, and other
resources as
> they are often being updated.
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish to
> unsubscribe, please edit your Membership preferences by visiting
this same
> page.
> 
> Please follow these basic guidelines:
> - As threads develop, trim off excess portions of earlier messages
to keep
> them short.
> - Good manners are required at all time. No personal attacks or flames.
> Hostile, aggressive or argumentative users may be removed from the
> membership without notice.
> - Keep your posts and threads related to the group topic of digital B&W
> printing. Users who persistently make off-topic posts may be removed
from
> the membership.
> - By posting on this forum you agree to abide by the group rules and
> guidelines, and to abide by the actions and decisions of the group
Owner and
> Moderators. See "Group Topic, Rules and Guidelines" in the Files
section:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> 
> BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
> YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE
LIABLE TO YOU
> FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
EXEMPLARY
> DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
> GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED
OF THE
> POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE
INABILITY
> TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED
ACCESS TO OR
> ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR
CONDUCT OF ANY

> THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER
> MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
> 
> Yahoo! Groups Links

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "B. Campbell"
<bellis60@v...> wrote:
> Yes but you have to manually feed the paper a sheet at a time
through the
> back.

Not so! I think you're confusing Epson HWM with some other paper.

Phil

>> Yes but you have to manually feed the paper a sheet at a time
through the
>> back.

>Not so! I think you're confusing Epson HWM with some other paper.


I was just basing my statement on the Epson 2200 instruction booklet, which
says to single feed "thick"  paper. I assumed from the name that Epson
Heavyweight Matte paper was a "thick" paper.  Apparently it isn't so I was
wrong. My apologies.

----- Original Message ----- 
From: "Phil Rose" <pjrose@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Tuesday, December 07, 2004 2:54 PM
Subject: Re: [Digital BW] Can i use epson heaveyweight matte on 2200 printer




--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "B. Campbell"
<bellis60@v...> wrote:
> Yes but you have to manually feed the paper a sheet at a time
through the
> back.

Not so! I think you're confusing Epson HWM with some other paper.

Phil







Please visit the Group Homepage to check the Files, and other resources as
they are often being updated.

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- Good manners are required at all time. No personal attacks or flames.
Hostile, aggressive or argumentative users may be removed from the
membership without notice.
- Keep your posts and threads related to the group topic of digital B&W
printing. Users who persistently make off-topic posts may be removed from
the membership.
- By posting on this forum you agree to abide by the group rules and
guidelines, and to abide by the actions and decisions of the group Owner and
Moderators. See "Group Topic, Rules and Guidelines" in the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/

BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY
DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY
TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR
ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY
THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER
MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.

Yahoo! Groups Links

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Phil Rose" <pjrose@f...> wrote:
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "danny"
> <dannyt@f...> wrote:
> > I've used Archival Matte with great results.
> > 
> But the answer to the question is "yes"; and also that the
> profile/settings
> for Enhanced Matte will work well when using Heavyweight Matte paper.
> IMHO, Heavyweight Matte prints
> essentially the same as Enhanced Matte (which AFAIK is the very same
> paper as the old Archival Matte).

Enhanced Matte is the old Archival Matte. Epson renamed it, when they found it wasn't as "archival" as one would like. The inks are still fine after archival testing, but the paper itself yellows.

Heavyweight Matte is an entirely different paper. The coating works well for dye inkjets like 1270 or 1280, but its too absorbant for 2200 pigment inks. The ink is hidden in the coating and you end up with low DMAX.